Product Description

We manufacture all standard CEMA screw conveyor sizes from 6\" to 48\" (and larger) in diameter. Whether you need a completely assembled screw conveyor or individual component parts, Conveyor has the products you\'re looking for. Stocked Conveyor Components

We stock approximately 1 million pounds of stainless steel material including screws, troughs, hangers, bearing and flighting. All are ready to ship to help save you time and money. Contact us today for more information

Custom Engineered Solutions

From a simple resize to a 3-D failure analysis of the most complex press screws, our experienced, professional engineers will work with you on the best solution to meet your needs.

Greased Purged Seals (GPS Series)

A seal’s a seal, right? Not anymore.

Our revolutionary Grease Purged Seal (GPS) is a major step forward. Unlike most others, our GPS seals are constructed of elastomers that center on the shaft – and flex with it.

How GPS seals work
Our revolutionary seal is comprised of multiple nitrile seals stretched over the rotating shaft. Some seals face inward (toward the product), while some face outward (away from the product).

The key to our GPS seal’s success are the inward seals – they maintain a tighter seal than those to the outside and decrease the likelihood of grease contamination reaching the product. The gap between these two seals is filled with grease through a remote “zerk” or other fitting. Other features include:

• Low Profile: The GPS seal is capable of retrofit into areas where waste pack and air purge seals were once used, allowing the use of standard 4-bolt flange bearings, and interchangeability with other seal designs.
• Effective up to 250º F and 15 psi (higher for short durations): We are continuing to test elastomers and grease that will tolerate even higher temperatures and pressures.
• Made with Heavy Gauge Elastomers: Nitrile or other compounds that provide you with useable life after years of running with average products. This design helps to create a seal that is more flexible and tighter, allowing it to conform to the shaft and remain effective even in high “run-out” situations.
• Easy Retrofit: The GPS seal will replace most waste pack and air purge seals already on the market with ZERO interchangeability problems. Throw out that leaky waste pack. Toss the air purge seals (and the regulator and air lines as well). Simply bolt the GPS seal in behind the flange bearings you’re currently using and you’re ready to go. What about a leaking flanged/packing gland seal? We can create a custom seal that will fit – and at a reasonable cost.
• Custom Designs Available: GPS seals can be modified to fit your company’s needs and increase the pressure resistance of your seal. The grease used can be petroleum based, synthetic, or food grade. The lips can be installed to ensure any grease purge leakage occurs away from the product. Custom metal components, special patterns and stack-up dimensions and higher pressure resistance are a simple matter.
• Successful in Difficult Applications: We have had repeated success sealing against hexane, high head loads of sugar, cooled fly ash, etc. The seals have lasted more than a year with only lubrication required.

GPS seals are as close to installing and forgetting a seal as you can get. Call 319.364.5600 or contact us today for more information on how GPS Seals can save you time and money.