Product Description

CL-200 Mini Parts Conveyor, Specifications:

• Length: 48\" or 60\" long.
• Belts: 8\" and 12\" Wide white PVC with 1\" high cleats on 12\" centers. Other belt types available.
• Beds: Formed steel channel slider bed frame 12\" and 16\" wide.
• Guard Rails: 2\" high angle with back flapped hopper.
• Supports: Single pipe pedestal base support.
• Drive: .20 HP Motorized pulley 1PH/60C /115V.
• Speed: 45 feet per minute. Other speeds available.
• Controls: On/Off switch with thermal overload wired and mounted w/8 foot cord and plug.

CL-300 Incline Cleated Belt, Specifications:

• Belts: 8\" to 24\" wide white or black PVC with 2\" high full width cleats vulcanized to belt on 12\" centers.
(other cleat heights & spacing available on request)
• Beds: Formed steel slider bed frame 12\" thru 30\".
• Supports: \"H\" type, adjustable height w/ sway bracing.
• Drive: Overhead mounted 1/3 HP TEFC motor-reducer with fully enclosed guard. 115 V/ 1 PH/60C or 230-460 V / 3 PH /60C (specify).
• Speed: Standard 60 ft. per minute. Optional Vari-Speed Drives also available.
• Guard Rails: 4\" high formed channel guard rail on both sides next to belt with rear flapper at infeed.
• Finish: Bilt-Rite blue.
• Electrical Controls: On/Off switch with thermal overload protection wired and mounted with 8 foot cord & plug.

CL-450 Parts Take-Away, Specifications:

• Belts: 12\", 18\" and 24\" wide white PVC with 1\" high UHMW block cleats bolted to belt on 12\" centers. (others available on request)
• Length: 30\" Horizontal section; 48\", 60\" or 72\" inclined section (@45° angle).
• Bed Frame: 7 3/4\" high formed steel channel.
• Supports: \"H\" type, adjustable height w/sway bracing.
• Drive: 1/3 HP TEFC motor reducer with fully enclosed guard 115V/ 1Ph/60C (3 phase also available).
• Speed: Standard 45 feet per minute. Optional Vari-Speed Drives also available.
• Controls: On/Off switch with thermal overload wired and mounted with 8 foot cord and plug.

LP-600 Low Profile Parts Conveyor, Specifications:

• Length: 5\'-6\", 7\'-6\" & 9\'-6\".
• Belt: 8\" or 12\" wide black PVC oil-resistant.
• Bed: Sturdy 11 gauge formed \"U\" pan, 12\" or 16\" wide.
• Supports: Adjustable height tripod on one end.
• Drive: 1/4 HP gear motor 115 Volt/1 phase/60 cycle.
• Pulleys: 4 1/2\" diameter drive, 1 5/16\" diameter tail.
• Speed: 45 feet per minute.
• Controls: On/Off switch with thermal overload protection wired and mounted with 8 foot cord and plug.
• Overhead mounted drive available to suit your needs.